ISSN   1004-0595

CN  62-1224/O4

Advanced Search
WANG Yi-fei, XIE Fa-qin, YAO Xiao-fei, WU Xiang-qing, MA Bing. Comparison on Tribological Properties between Cu Coating and Ni-P Coating on P110 Oil Tube Steel Substrate[J]. TRIBOLOGY, 2012, 32(1): 64-69.
Citation: WANG Yi-fei, XIE Fa-qin, YAO Xiao-fei, WU Xiang-qing, MA Bing. Comparison on Tribological Properties between Cu Coating and Ni-P Coating on P110 Oil Tube Steel Substrate[J]. TRIBOLOGY, 2012, 32(1): 64-69.
shu

Comparison on Tribological Properties between Cu Coating and Ni-P Coating on P110 Oil Tube Steel Substrate

  • School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China

Funds: 

The project was supported by the Science and Technology Planning Program of Shaanxi Province (2011K07-01).

More Information
  • Received Date: September 05, 2011
  • Revised Date: November 29, 2011
    Graphical Abstract
    • Abstract
  • Cu and Ni-P coatings on the P110 steel's substrate were deposited. The tribological properties of P110 substrate, Cu coating and Ni-P coating were comparatively investigated. The morphologies of the wear scar were analyzed by using scanning electron microscopy, energy dispersive spectroscopy and scanning tunneling microscopy and the wearing mechanism was discussed. The results show that the wear resistance of the two kinds of coatings was significantly improved as compared to that of P110 substrate. The wear resistance of Ni-P coating was better than that of Cu coating. The flaking pit was observed on the wear scar of P110 substrate, and the wear mechanisms were delamination and abrasive wear. In case of Cu coating, plastic deformation caused by adherent copper debris under compression was found on the wear scar and the wear mechanisms were fatigue and adhesive wear. The grooves on the wear scar of the Ni-P coating indicated mild abrasive wear.
    • FullText(HTML)
    • References (14)
  • [1]
    [李鹤林,韩礼红,张文利. 高性能油井管的需求与发展[J]. 钢管, 2009, 38(1):1-9.

    Li H L,Han L H,Zhang W L. Demand for and development of hi-performance OCTG [J]. Steel Pipe, 2009, 38(1): 1 - 9.
    [2]
    [林元华, 付建红, 施太和.套管磨损机理及防磨措施研究[J].天然气工业,2004,24(7):58-61.

    Lin Y H, Fu J H, Shi T H. Mechanism of casing wear and research of measures of preventing wear[J]. Natural Gas Industry, 2004, 24(7): 58 - 61.
    [3]
    [张永强, 王新虎. 油套管螺纹抗粘扣技术研究进展[J].石油矿场机械, 2008, 37(2): 78-81.

    Zhang Y Q, Wang X H. Review on anti-galling technology for tubing and casing[J]. Oil Field Equipment,2008,37(2):78-81.
    [4]
    Lee S Y, Kim G S, Kim B-S. Mechanical properties of duplex layer formed on AISI 403 stainless steel by chromizing and boronizing treatment[J]. Surface and Coatings Technology, 2004, 177-178 : 178-184.
    [5]
    [黄元盛, 刘宏伟. 低温渗铬层耐磨性和附着性的研究[J]. 热加工工艺, 2008, 37(20): 64-66.

    Hang Y S, Liu H W. Wear and adhesion property of low-temperature chromized layer[J]. Hot Working Technology, 2008, 37(20): 64-66.
    [6]
    [张国平.等通道转角挤压对纯铜组织细化的作用[J]. 金属热处理, 2008, 33(2): 68 - 71.

    Zhang G P. Influence of equal channel angle extrusion on the structure refinement of pure copper[J]. Heat Treatment of Metals, 2008, 33(2): 68 - 71.
    [7]
    Kovacik J, Emmer S, Bielek J. Effect of composition on friction coefficient of Cu-graphite composites[J].Wear, 2008, 265(3/4): 417-421.
    [8]
    [石雷, 刘维民. Cu/Ni-P多层膜的制备及其摩擦学性能研究[J].摩擦学学报, 2004, 24(5):397-401.

    Shi L, Liu W M. Preparation and tribological properties of Cu/Ni-P multilayer electrodeposited on beryllium bronze[J].Tribology,2004, 24(5):397-401.
    [9]
    [周泽翔, 程海斌, 薛理辉, 等. 改善化学镀层结合力的方法及其检测手段[J]. 材料导报, 2006, 20(2):79-81.

    Zhou Z X, Cheng H B, Xue L H, et al. The methods of improving and checking adhesion of coating electroless-plated[J]. Materials Review, 2006, 20(2): 79-81.
    [10]
    [孙家枢. 金属的磨损[M]. 北京:冶金工业出版社,1992:118-122.

    Sun J S. Wear of metal[M]. Beijing: Metallurgy Industrial Publication,1992:118-122.
    [11]
    [符蓉, 宋宝韫, 高飞,等. Cu-SiO2 烧结材料的摩擦磨损性能研究[J].摩擦学学报, 2007, 27(4): 377 - 381.

    Fu R, Song B Y, Gao F, et al. Study on the friction and wear properties of sintered Cu-SiO2 composites[J]. Tribology, 2007, 27(4): 377-381.
    [12]
    [林兰芳, 林绿波, 戴品强. 电沉积纳米晶Ni-Co-Fe-P合金镀层的组织结构与摩擦磨损性能 [J].摩擦学学报,2011,(4):340-345.

    Lin L F, Lin L B, Dai P Q. Microstructure and tribological properties of electrodeposition nanocrystalline Ni-Co-Fe-P alloy coating[J]. Tribology, 2011,(4):340 - 345.
    [13]
    Doris K W. What role for contact spots and dislocations in friction and wear[J].Wear, 1996, 200:8-29.
    [14]
    [王文健, 刘启跃, 周仲荣. 车轮钢滚动剥离摩擦磨损特性研究[J]. 摩擦学学报, 2005, 25(5):475-479.

    Wang W J, Liu Q Y, Zhou Z R. Study on friction and wear properties of wheel steel under rolling-sliding condition[J]. Tribology, 2005, 25(5):475-479.
    • Related Articles

Catalog

    Get Citation
    PDF
    XML
    Article views (2512) PDF downloads (1539) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References

    Author Center

    Email Alert RSS

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return